 |
 |
AS-1010S-MRB |
- A+ Server 1010S-MRB (Black)
|
|
 |
CPU |
- Single 939-pin ZIF Sockets
- Supports one Dual-Core AMD Opteron 100 Series processor
- 1MB Cache
- 4 phase VRM
|
Chipset |
- HyperTransport Link
- ServerWorks HT1000 I/O Hub
|
|
 |
Memory Capacity |
- Four 184-pin DIMM sockets
- Supports up to 4 GB DDR 400/333 MHz memory or
- Single or Dual (recommended) channel memory
|
Memory Type |
- DDR 400/333MHz unbuffered ECC/non-ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
 |
SATA |
- 4 SATA Ports using ServerWorks HT1000 controller
|
IDE |
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100
|
IPMI |
|
Network Controllers |
- Broadcom BCM5704C Dual Gigabit Ethernet Controller
- Supports 1000BASE-T, RJ45 output
|
VGA |
- ATI Rage XL 8MB PCI Graphics Controller
- VGA Port
|
Super I/O |
|
Clock Generator |
|
|
 |
PCI-X |
- 1 64-bit 133MHz PCI-X (3.3V) slot
|
|
 |
SATA |
|
IDE |
- Single ATA 100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA/100
|
Floppy |
|
LAN |
|
USB |
- 2 USB Rear Ports
- 2 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 2 Fast UART 16550 serial ports
- 1 Header
|
|
 |
BIOS Type |
- 4Mb Flash EEPROM with AMI® BIOS
- SST-49LF004B BIOS Chip
|
BIOS Features |
- Plug and Play (PnP)
- ACPI 1.0
- PCI 2.2
- DMI 2.3
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Legacy support
- Hardware BIOS Virus Protection
- RTC (Real Time Clock) Wakeup
|
|
 |
 |
 |
Form Factor |
|
Model |
|
 |
 |
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
 |
 |
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
|
Ports |
- 2x USB Ports (USB 2.0 Ready)
|
 |
 |
Floppy |
- 3.5" 1.44MB Slim Floppy Drive
|
CD-ROM |
|
 |
 |
Fans |
- 1x 5K RPM 10cm Blower Fan
|
Air Shroud |
|
|
 |
Thermal control 260W AC power supply with PFC [ 24-pin, 4-pin=12V, (2) 4-pin ] |
AC Voltage |
- 100 - 240V, 60-50Hz, 4 Amp Max
|
DC Output |
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
 |
Safety / EMC |
- USA - UL Listed, FCC
- Canada - CUL listed
- Germany - TUV Certified
- Europe/CE Mark
- EN 60950/IEC 60950-Compliant
|
|
 |
CPU |
- Monitors CPU Core Voltages, +5V, ±12V, 2.5V Standby, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU 4-phase Switching Voltage Regulator
- Supports System Management Utility
|
FAN |
- Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
|
LED |
- CPU / Overheat LED
- Suspend-state indicator LED
|
Other Features |
|
|