A+ Server 1021TM-INF+B
  A+ Products  Systems  1U   [ 1021TM-INF+B ]








Integrated Board
Super H8DMT-INF+


Key Features

Two systems (nodes) in a 1U form factor. Each node supports: 1. Two Six-Core AMD Opteron™ 2000

    Series (Socket F) processor support;

    HT3.0 Link support
2. nVIDIA MCP55V-Pro chipset
3. Onboard Infiniband MT25204 20Gbps
4. Dual MCP55V-Pro GbE LAN controllers
5. Up to 128GB DDR2 800/667/533/400

    SDRAM (16 DIMMs)
6. PCI-Express x16 (low-profile) slot
7. Supports two 3.5" hot-swap SATA

    drive bays and/or Internal Type A

    USB ports for OS or storage
8. SIMSO socket (IPMI 2.0 with virtual

    media over LAN & opt. KVM-over-LAN)
9. 980W High-efficiency power supply

Available Colors: Black    


 Drivers & Utilities       BIOS       Manuals

 Tested Memory List     


Product SKUs
AS-1021TM-INF+B
  • A+ Server 1021TM-INF+B (Black)
 
Motherboard
2x H8DMT-INF+
 
Processor/Chipset (per Node)
CPU
  • Support two Six-Core AMD Opteron™

    2000 Series (Socket F) processors



    NOTE: Support processors with

    Max ACP ≤ 75W
Chipset
  • nVIDIA MCP55V-Pro chipset with

    up to 2.4GHz Hyper Transport Link support
 
System Memory (per Node)
Memory Capacity
  • Sixteen 240-pin DIMM sockets
  • Up to 128GB of Reg. ECC DDR2 memory *
Memory Type
  • Reg. ECC DDR2 800/667/533/400 MHz
  • SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8 V only
Error Detection
  • Corrects single-bit errors, detects

      double-bit errors (using ECC)
  • Supports Chipkill technology
 
On-Board Devices (per Node)
SATA
  • nVIDIA MCP55V-Pro controllers

      RAID 0, 1 support
Network Controllers
  • nVIDIA MCP55V-Pro Dual-port Ethernet

      controllers
VGA
  • XGI Z9S 32MB PCI Graphics Controller
Infiniband
  • Mellunox MT25204 20Gbps controller

      Single port
 
Expansion Slots (per Node)
PCI-Express
  • PCI-E x16 (low-profile) slot
 
Input / Output (per Node)
SATA
  • 4x Serial ATA ports
LAN
  • 2x RJ45 LAN ports
Infiniband
  • 1x External Infiniband port
USB Total of 6 USB 2.0 Compliant ports

• 2x USB rear ports

• 2x USB internal headers

• 2x USB internal ports (Type A)
VGA
  • 1x VGA port
Serial Ports
  • 1x Header, 1x Port
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 27.75" (704mm)
Gross Weight
  • 34 lbs (15.4kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Two sets of independent Power switch

    and reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • Two Network activity LEDs
  • System Overheat LED
Chassis
Form Factor
  • 1U Rackmount
Model
 
Drive Bays
Hot-swap
  • Two sets (4 total) of 2x 3.5" hot-swap

      SATA Drive Bays
 
System Cooling
Fans
  • Six heavy duty counter-rotating fans with

    optimal fan speed control and air shroud
 
Power Supply
980W AC-DC power supply w/ PFC
AC Input
  • 100 - 240V, 60-50Hz, 14-6 Amp
+5V sb
  • 4 Amp
+12V
  • 81 Amp
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
  • SST-49LF080A BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • ACPI 1.0 / 2.0
  • PCI 2.2
  • DMI 2.3
  • BIOS Rescue Hot Keys
  • SMBIOS 2.3
  • USB Keyboard support
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • CPU Fan auto-off in sleep mode
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
  • CPU switching voltage regulator
FAN
  • 6x fans w/ tachometer status monitoring
  • Status monitor for speed on / off control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 6x Fan Status
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-H8DMT-INF+

CSE-808TS-980BP

BPN-SAS-808
2

1

1
Super H8DMT-INF+ Motherboard

1U SC808 Chassis with 980W power supply (B = Black)

Backplane
Air Shroud MCP-310-80802-0B 2 Internal Air Shroud for SC808, AMD DP
Cable(s) CBL-0226L

CBL-0228L

CBL-0087

CBL-0212L
2

2

2

2
43CM SATA ROUND S-RA PBF

55CM SATA ROUND S-RA PBF

Round 16 to 16 pin ribbon FP cable 20"

SATA Power Adapter Cable; HDD power extension cable, 20cm
CD CDR-A+NVDA2 1 Driver CD for MCP55 Chipset A+ motherboards
Fan(s) FAN-0085L 6 40x40x56 mm 6-pin 1U Cooling Fan
Heatsink Components SNK-P0022+ 4 1U Passive CPU Heatsink
Mounting Rails CSE-PT51L 1 1U SC813 Mounting Rail Kit
Power Supply PWS-981-1S 1 980W 1U Cold-swap 12V output power supply
Riser Card RSC-R1U-E16R 1 Riser Card
Optional Parts List
  Part Number Qty Description
IPMI ** AOC-SIMSO

AOC- SIMSO+
-

-
IPMI 2.0 w/ Virtual Media Over LAN

IPMI 2.0 w/ Virtual Media + KVM Over LAN
  * Fully populated DDR2 667 or 800 will be downgraded to DDR2 533

** It is recommended to use dedicated LAN for KVM-over-LAN with fast speed needed.
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Page Viewed: