X9DAX-7F-HFT (OEM Only)

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Motherboards   Xeon® Boards   [ X9DAX-7F-HFT ]

Supermicro motherboard X9DAX-7F-HFT
Key Features
• Support Hyper-Speed
1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 1TB ECC DDR3, up to 1866MHz;
    16x DIMM slots
4. 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8,
    1 UIO PCI-E 3.0 x8 (for SMCI UIO HBA)
    or 1 PCI-E 2.0 x4 (in x8)
5. Intel® i350 Dual port GbE LAN
6. 8x SATA2 and 2x SATA3 ports
7. 8x SAS2 ports from Broadcom 2208
8. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
9. Dual port front and rear USB 3.0
10. Performance boost with Hyper-Speed
   
 
Links & Resources
Tested Memory List
Tested Memory List at Hyper-Speed
Tested HDD / SSD List
Update Your BIOS
BMC/IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Heat Sink Compatibility
OS Compatibility
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X9DAX-7F-HFT -O
  • X9DAX-7F-HFT (Standard Retail Pack)
MBD-X9DAX-7F-HFT -B
  • X9DAX-7F-HFT (Bulk Pack)
 
Physical Stats
Form Factor
  • Enhanced Extended ATX
Dimensions
  • 13.68" x 13" (34.74cm x 33cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600
        and E5-2600 v2 family
        (up to 150W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM slots
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
     64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1
SAS
  • SAS2 from Broadcom 2208 (1GB cache)
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 16 devices as default, more HDD devices support is also available as an option *

    * For special sku, please contact your Supermicro Sales.
(Both CPUs need to be installed for SAS controller to be enabled)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • Matrox G200eW
Audio
  • RealTek ALC889 7.1 High Definition Audio with S/PDIF header
 
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 8 SATA 2.0 ports (3Gb/s)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports (Renesas uPD720200A; 2 rear + 2 via header)
  • 7 USB 2.0 ports total
    (4 rear + 2 via header + 1 Type A)
Audio
  • Line-in / Line-out / Microphone Ports
Serial Port / Header
  • 1 Fast UART 16550 Header
IEEE 1394a
  • 2 Headers
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM Header
Chassis (Optimized for X9DAX-7F-HFT )
2U Chassis
  • CSE-829BTQ-R1K28LPB
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X9DAX-7F-HFT
Model(s)
  • SYS-6027AX-72RF-HFT1
  • SYS-6027AX-72RF-HFT3
  • SYS-6027AX-72RF-HFT2

 
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16
  • 3x PCI-E 3.0 x8
  • 1x UIO PCI-E 3.0 x8 (for SMCI UIO HBA) or 1x PCI-E 2.0 x4 (in x8)

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 6+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)


Note:  X9DAX-7F-HFT is for server SKUs (SYS-6027AX-72RF-HFT1, SYS-6027AX-72RF-HFT2 and SYS-6027AX-72RF-HFT3) only, please contact Supermicro sales for more details.

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.