X9DBi-TPF

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Motherboards   Xeon® Boards   [ X9DBi-TPF ]

Supermicro motherboard X9DBi-TPF
Key Features
1. Dual socket B2 (LGA 1356) supports
    Intel® Xeon® processor E5-2400 v2
2. Intel® C602 chipset
3. Up to 768GB DDR3 1600MHz LRDIMM
    / 384GB RDIMM; 12x DIMM slots
4. Expansion slots: 1 PCI-E 3.0 x16,
    2 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8),
    1 PCI-E 2.0 x4 (in x8), 1 Legacy PCI 32
5. Intel® 82599EN 10G SFP+ Single port
    + Dual i210 GbE LAN
6. 2x SATA3 and 8x SATA2 ports
7. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
8. 8x USB 2.0 ports
    (2 rear, 4 via header + 2 Type A)
   
 
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Quick Reference Guide
Update Your BIOS
BMC/IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Heat Sink Compatibility
OS Compatibility
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X9DBi-TPF -O
  • X9DBi-TPF (Standard Retail Pack)
MBD-X9DBi-TPF -B
  • X9DBi-TPF (Bulk Pack)
 
Physical Stats
Dimensions
  • 12.3" x 13" (31.24cm x 33.02cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2400   and E5-2400 v2 (up to 95W TDP **)
  • Dual Socket B2 (LGA 1356)
Cache
  • Up to 25MB
System Bus
  • QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support
 
System Memory
Memory Capacity
  • 12x 240-pin DDR3 DIMM slots
  • Up to 768GB DDR3 ECC LRDIMM
  • Up to 384GB DDR3 ECC Registered memory (RDIMM)
  • Up to 96GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
    64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82599EN Single Port 10G SFP+
  • Intel® i210 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10G SFP+, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
(Both CPUs need to be installed for 10Gb LAN port to be enabled)
Video
  • Matrox G200eW
 
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 8 SATA 2.0 ports (3Gb/s)
LAN
  • 1 SFP+ 10GbE LAN port
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 8 USB 2.0 ports total
    (2 rear + 4 via header + 2 Type A)
Video
  • 1 VGA port
Serial Port / Header
  • 2 Fast UART 16550 ports: 1 rear, 1 header
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM Header
Chassis (Optimized for X9DBi-TPF )
2U Chassis
3U Chassis
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

 
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x16
  • 2x PCI-E 3.0 x8
  • 1x PCI-E 3.0 x4 (in x8)
  • 1x PCI-E 2.0 x4 (in x8)
  • 1x PCI-32 Legacy

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • Eight 4-pin fan headers with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS
  • Dual Cooling Zones
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
  Part Number Qty Description
X9DBi-TPF MBD-X9DBi-TPF 1 X9DBi-TPF Motherboard
I/O Cables CBL-0044L 6 SATA CABLE 61CM FLAT S-S PBF
I/O Shield MCP-260-00062-0N 1 Standard I/O Shield for X9DB3 with EMI Gasket
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.