X6DHE-G2+
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X6DHE-G2+ ]
X6DHE-G2+
Key Features
1. Dual Intel® 64-bit Xeon® Support,
   up to 3.80 GHz, 800 MHz FSB
2. Intel® E7520 (Lindenhurst) Chipset
3. Up to 16GB DDR2 400 SDRAM
4. Intel® 82546GB Dual-port Gigabit
    Ethernet Controllers
5. 2x SATA Ports via ICH5R Controller
    SATA Controller
6. 2 (x8) & 1 (x4) PCI-Express,
    1x 64-bit 133MHz PCI-X,
    2x 64-bit 100MHz PCI-X
7. IPMI 2.0 Socket
8. ATI RageXL 8MB Graphics

 
Links & Resources
Recommended Chassis
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X6DHE-G2+-O
  • X6DHE-G2+ (Standard Retail Pack)
MBD-X6DHE-G2+-B
  • X6DHE-G2+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12" x 13.05" (30.5cm x 33.2cm)
 
Processor/Cache
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Xeon (Paxville) Dual Core CPU with 2x2MB L2 Integrated Advanced Transfer Cache
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800 MHz system bus
Operating System Software
 
System Memory
Memory Capacity
  • Eight 240-pin DIMM sockets
  • Supports up to 16 GB DDR2 400MHz memory
  • Dual channel memory bus
  • Memory must be populated in pairs
  • Single-rank modules are recommended for 6+ DIMM support
Memory Type
  • DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB
Memory Voltage
  • 1.8V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® E7520 chipset
  • MCH + ICH5R + PXH +82546GB
SATA
  • ICH5R SATA Controller
  • RAID 0, 1, JBOD support
IPMI
Network Controllers
  • Intel® 82546GB Dual Port Gigabit Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
  • National 87427 chip
 
Input / Output
Serial ATA
  • Two Serial ATA ports
  • Two SATA hard drives supported
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 3x USB internal headers
  • USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
Parallel Port
  • 1 ECP / EEP parallel port
Chassis ( Optimized for X6DHE-G2+ )
2U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To ensure system stability with non-Paxville CPUs, a 420W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
  • To ensure system stability with Paxville Dual Core CPUs, a 500W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
  • Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
 
Expansion Slots
PCI-Express
  • 2 (x8) PCI-e slots
  • 1 (x4) PCI-e slot
PCI-X
  • 1x 64-bit 133MHz PCI-X (3.3V) slot
  • 2x 64-bit 100MHz PCI-X (3.3V) slots
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.1
  • ACPI 1.0
  • PCI 2.2
  • PCI-X 1.0
  • Fan Speed Control
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI/APM Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • CPU Fan auto-off in sleep mode
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
FAN
  • Total of four 4-pin and four 3-pin fan headers
  • 8x fans with status monitoring
  • Status monitor with firmware/software on/off control
  • Low noise fan speed control
  • 4x Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 support
LED
  • CPU Overheat LED
  • System Overheat LED
  • Suspend-state indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
OS Compatibility

• Please see our OS Compatibility Chart
Parts List
  Part Number Qty Description
X6DHE-G2+ MBD-X6DHE-G2+-O 1 X6DHE-G2+ Motherboard
Manual(s) MNL-0727 1 Motherboard Manual for X6DHE-G2+
I/O Cables CBL-0010
CBL-0022
CBL-0036-02
CBL-0044
CBL-0083
1
1
1
1
1
9-pin Serial Port Cable
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
-
Driver Disk CDR-INTC 1.20 1 Version 1.20 CD or later
I/O Shield CSE-PT7 1 Motherboard I/O Shield

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.