X8DTG-QF+
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X8DTG-QF+ ]
X8DTG-QF+
1U and 2U Dual Xeon 4/6 GPU ServerBoard

Key Features
1. Intel® Xeon® processor 5600/5500
    series (dual), with QPI up to 6.4 GT/s
2. Dual Intel® 5520 (Tylersburg) Chipset
    + PLX 8647
3. Up to 96GB DDR3 1333/1066/800MHz
    ECC Registered DIMM
4. Intel® 82576 Dual-Port Gigabit
    Ethernet Controllers
5. 6x SATA (3 Gbps) Ports via
    ICH10R Controller
6. 4 (x16) PCI-E 2.0, 2 (x8) PCI-E 2.0,
    2 (x4) PCI-E Gen 1.0 via riser cards
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with KVM and
    Dedicated LAN

 
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X8DTG-QF+ -B
  • X8DTG-QF+ (Server Only)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 19.8" x 9.2" (50.29cm x 23.37cm)
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
     
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 130W

       
    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W

       
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 6x 240-pin DIMM sockets
  • Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Dual Intel® 5520 (Tylersburg) chipset + PLX 8647 + ICH10R
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-port Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond W83527HG chip
Clock Generator
  • 932S421 chip
 
Input / Output
Serial ATA
  • 6 Serial ATA ports
  • 6 SATA hard drives supported
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 rear USB 2.0 ports
Serial Port
  • 1 Serial header
Video
  • 1 VGA Connector
Chassis ( Optimized for X8DTG-QF+ )
1U Chassis
  • CSE-118GQ-R1800B
2U Chassis
  • CSE-218G-R1800B
  • CSE-218XGQ-R1800B
 
Expansion Slots
PCI-Express
  • 4 (x16) PCI-E 2.0 slots, full-height full-length (support GPU cards)
  • 2 (x8) PCI-E 2.0 (in x16) slots and 2 (x4) PCI-E 1.0 slots via riser cards
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of 12 fan headers supporting up to 12 fans
  • 12 4-pin fan headers
  • 12 fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 12 fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List
  Part Number Qty Description
X8DTG-QF+ MBD-X8DTG-QF+ -O 1 X8DTG-QF+ Motherboard

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.