 |
|
 |
| SYS-5013S-8 |
- SuperServer 5013S-8 (Beige)
|
| SYS-5013S-8B |
- SuperServer 5013S-8B (Black)
|
|
|
| CPU |
|
• Single mPGA604 ZIF Socket
• Supports one Intel® Xeon® processor with 512KB L2 (or 1MB L3) integrated Advanced Transfer Cache up to 3.06GHz |
 |
| System Bus |
|
533MHz/400MHz system bus |
|
|
|
| Memory Capacity |
|
• Four 184-pin DIMM sockets
• Supports up to 4 GB DDR266/200 memory |
|
| Memory Type |
|
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
|
| DIMM Sizes |
|
128MB, 256 MB, 512 MB, 1 GB |
|
| Memory Voltage |
|
2.5 V only |
|
|
|
| Chipset |
|
Serverworks™ GC-SL Chipset |
|
| SCSI |
|
• Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI |
|
| RAID |
|
Support for Zero-Channel RAID
(Card NOT included) |
|
| Network Controllers |
|
• 1x Broadcom 5702 Gigabit Ethernet
• 1x Intel® 82551 10/100 Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
|
|
|
| 1x full-height, full-length 64-bit 33MHz PCI expansion slot (Riser card required) |
|
|
|
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
|
| USB |
|
Up to 4 USB ports |
|
| Serial Ports |
|
2 Fast UART 16550 serial ports |
|
| Parallel Port |
|
1 ECP/EEP parallel port |
|
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
|
|
| BIOS Type |
|
4Mb Flash EEPROM with AMI® BIOS |
|
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection |
|
|
|
|
|
| Form Factor |
|
1U Rackmount |
|
| Model |
|
SC810 |
|
|
|
| Height |
|
1.7" (43mm) |
|
| Width |
|
16.8" (426mm) |
|
| Depth |
|
22.6" (574mm) |
|
| Gross Weight |
|
34 lbs (15.4 kg) |
|
| Available Colors |
|
Beige, Black |
|
|
|
| Buttons |
|
• Power On/Off button
• System Reset button
|
|
| LEDs |
|
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
|
|
|
|
| Hot-swap |
|
2x 3.5"SCSI (SCA) Hot-swap drive bays |
|
|
|
| 1x 2-Port Ultra160/320 SCSI Backplane |
|
|
|
| Thermal control 250W AC power supply [ 24-pin ] |
|
| AC Voltage |
|
• 100 - 240V, 47-63Hz, 4 Amp |
|
| DC Output |
|
• 5V + 3.3V ≤ 230W
• 12V + 5V + 3.3V ≤ 250W |
|
| +5V |
|
25.0 amp |
|
| +5V standby |
|
2.0 amp |
|
| -5V |
|
0.3 amp |
|
| +12V |
|
13.0amp |
|
| -12V |
|
0.8 amp |
|
| +3.3V |
|
20.0 amp |
|
|
|
| CPU |
|
• Monitors for CPU Cores, +2.5V, +3.3V, +5V, ±12V
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via Dip Switch) |
|
| FAN |
|
• Total of five 3-pin fan headers
• 3x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
|
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
|
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
|
| Other Features |
|
• Chassis intrusion detection
• Chassis intrusion header |
|
|
