 |
|
|
|
|
|
|
|
|
|
|
| Integrated Board |
|
|
|
|
|
Key Features
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
2. 288GB** DDR3 1333/ 1066/
800MHz ECC Registered DIMM /
48GB Unbuffered DIMM
3. Left Slot (Full-height / Full-length):
2 (x8) PCI-E 2.0 slots
4. Right Slot (Low-Profile - 5.5" depth):
1 (x4) PCI-E 2.0 (in x8 slot)
5. LSI 2108 8-Port 6Gbps SAS Controller;
RAID 0, 1, 5, 6, 10
6. Intel® 82576 Dual-Port Gigabit
Ethernet Controller
7. 4x 3.5" Hot-swap SAS/SATA Drives,
For Customizable Storage
8. 700W Gold-Level Redundant
Power Supply
|
|
|
Available Colors:
|
Black  |
|
 |
|
|
|
|
|
|
 |
| SYS-6016T-6RF+ |
- SuperServer 6016T-6RF+ (Black)
|
| |
|
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 130W
- Intel®
Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| QPI |
|
| |
|
| Memory Capacity |
- 18x 240-pin DIMM sockets
- Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB
, 8GB
, 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| Note: |
This board does not support LRDIMM memory. Please refer to HERE for list of motherboards with LRDIMM support. |
| |
|
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R
|
| SAS |
- LSI 6Gbps SAS 2108 w/ Hardware RAID support
- RAID 0, 1, 5, 6, 10 support
- BBU (battery backup) extension kit (optional)
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| |
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB rear ports
- 1x USB on-board
- 2x USB internal headers
- Total 5 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off Button
- System Reset Button
- UID Button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Universal Information (UID) LED
|
| |
|
| PCI-Expansion |
|
| |
|
|
| Hot-swap |
- 4x 3.5" SAS / SATA Hot-swap drive trays
|
| |
|
|
| DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM drive
|
| |
|
|
| 1U SAS/SATA Backplane w/ SES2 Enclosure Management |
| |
|
|
| Fans |
|
| Shroud |
|
| |
|
|
| 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
| AC Input |
- 700W: 100-140 V, 50-60 Hz, 8.5-6 Amp
- 750W: 180-240 V, 60-50 Hz, 5-3.8 Amp
|
DC Output
+5V standby |
|
DC Output
+12V |
- 700W: 58 Amp @ 100-140V
- 750W: 62 Amp @ 180-240V
|
| With Power Distributor |
- +5V: 25 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
|
| Certification |
 Gold Certified
|
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
 |
|
|
See Parts List
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X8DTU-6F+
CSE-819TQ-R700UB |
1
1 |
Super X8DTU-6F+ Motherboard
1U Chassis |
| Air Shroud | MCP-310-81901-0B |
1 |
Mylar air shroud for SC819, X8DTU+ MB |
| Backplane |
BPN-SAS-815TQ |
1 |
BPN-SAS-815TQ-O-P |
| Cable 1 | CBL-0288L |
1 |
IPASS TO 4 SATA 70/60/50/50CM, W/ 70CM SB, RA ,30AWG |
| CD |
CDR-X8 |
1 |
For X8 series |
| Riser Card |
RSC-R1UU-2E8 |
1 |
RISER CARD RSC-R1UU-2E8 |
| Riser Card |
RSC-R1UU-E8R+ |
1 |
RSC-R1UU-E8R+ REV 1.00, PBF |
| Heatsink / Retention |
SNK-P0037P |
2 |
1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP) |
| Power Supply | PWS-703P-1R |
2 |
1U REDUNDANT PWS 50MM W PMBUS GOLD EFFICIENCY 50MM |
| Power Distributor | PDB-PT819-8824 |
1 |
SC819 24pin redundant PDB |
| Cable 2 | CBL-0335L |
1 |
FRONT CTL CABLE 20 PIN TO 20 PIN W/TUBE,70CM,PBF. 28AWG |
| Fan 1 | FAN-0101L4 |
5 |
40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 |
| Drive Tray(s) | MCP-220-00075-0B |
4 |
Black gen 5.5 hot-swap 3.5\" HDD tray |
| Mounting Rails | MCP-290-00062-0N |
1 |
Rail set, quick/quick, default for 1U 17.2 |
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| BBU (Battery Backup Unit) |
BTR-0018L-0000-LSI |
- |
Battery Backup for SAS 2108
(Need Extension Kit BTR-0018L-kit to be installed) |
| BBU (Battery Backup Unit) Extension Kit |
BTR-0018L-kit |
- |
Battery Backup Extension Kit
(Need to be installed at a 2.5" HDD location) |
| UIO Controller Card(s) |
- |
- |
Please refer to our UIO Add-on Card Table |
Hide Parts List
|
|
|
|
*** Only 1 drive is included, these items (***) are interchangeable. CDM-SATA w/ CBL-0061L and CDM-USATA-G w/ CBL-0341L
** 16GB LRDIMM is required, see Tested Memory List |
|
|
|
