 |
 |
| SYS-5025M-i+ |
- SuperServer 5025M-i+ (Beige)
|
| SYS-5025M-i+B |
- SuperServer 5025M-i+B (Black)
|
| |
 |
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Xeon® 3200 Series quad-core processor
- Supports an Intel® Xeon® 3000 Series (Conroe) dual-core processor
- Supports an Intel® Pentium® D dual-core processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® D processor
- Hyper-Threading (HT) capable
|
| System Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
 |
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
|
| Memory Type |
- DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
 |
| Chipset |
- Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel® 82573V + Intel® 82573L
|
| Serial ATA |
- Intel® ICH7R SATA controller built-in (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIM1U Slot - Supermicro Intelligement Management
- (Optional: AOC-SIM1U+)
|
| Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA |
- On-board ATI ES1000 (16MB) graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
 |
| Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- Up to 4x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 1 internal header for 2 ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| Parallel Port |
- 1x internal header for ECP / EPP parallel port
|
| |
 |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
|
|
 |
 |
 |
| Height |
3.5" (89mm) |
| Width |
16.8" (426mm) |
| Depth |
25.6" (650mm) |
| Gross Weight |
55 lbs (24.9kg) |
| Available Colors |
Beige, Black |
 |
 |
| Buttons |
Power On/Off button
System Reset button
|
| LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
|
| |
 |
| PCI-Express |
- 1 (x4) PCI-e slot
- 1 (x8) PCI-e slot
|
| PCI - X |
- 2x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
 |
 |
| Internal |
2x Internal 3-Hard Drive carriers (for total of 6 HDD support) |
| Peripheral Bay(s) |
1x 5.25" full-height peripheral bay |
 |
 |
| Floppy |
Panasonic 3.5" 1.44MB Floppy Drive |
| CD-ROM |
Slim 24x CD-ROM Drive |
| |
 |
| Fans |
4x 80mm 6300 RPM fans |
| |
 |
550W power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] |
| AC Voltage |
- 100 - 240V, 47-63Hz, 9/3.5 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| -5V |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
 |
| CPU |
- Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
|
| LED |
- CPU / System Overheat LED
- Standby alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|