 |
 |
SYS-6021-F |
- SuperServer 6021F (Beige)
|
SYS-6021-FB |
- SuperServer 6021FB (Black)
|
 |
 |
CPU |
 |
Dual FCPGA370 ZIF Sockets Supports an Intel® Pentium® III processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz |
 |
System Bus |
 |
133MHz/100MHz system bus |
 |
 |
 |
Memory Capacity |
 |
Four 168-pin DIMM sockets
Supports up to 4 GB of PC133/100 memory |
 |
Memory Type |
 |
PC133/100 72-bit registered ECC SDRAM, 168-pin gold-plated DIMMs
Dual channel memory bus Memory must be populated in pairs |
 |
DIMM Sizes |
 |
64 MB, 128 MB, 256 MB, 512 MB, 1 GB |
 |
Memory Voltage |
 |
2.5 V only |
 |
 |
 |
Chipset |
 |
Serverworks Serverset III HE-SL chipset NB-HE-SL + CSB5 + CIOB2 |
 |
SCSI |
 |
Adaptec AIC-7899W Controller Dual-Channel Ultra160 SCSI |
 |
Network Controllers |
 |
1x Intel® 82559 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
 |
 |
 |
6x low-profile full-length 64-bit PCI expansion slots |
 |
 |
 |
AGP |
 |
2x AGP Pro slot
|
 |
PCI Expansion |
 |
2x 64-bit 66/33MHz PCI (3.3V) slots
4x 64-bit 33MHz PCI (3.3V) slots
|
 |
IDE |
 |
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
 |
USB |
 |
Up to 2 USB ports |
 |
Serial Ports |
 |
2 Fast UART 16550 serial ports |
 |
Parallel Port |
 |
Port header provided; parallel cable required for parallel port |
 |
Floppy |
 |
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
 |
Keyboard / Mouse |
 |
PS/2 keyboard and mouse ports |
 |
 |
 |
BIOS Type |
 |
4Mb Flash EEPROM with AMI® BIOS |
 |
BIOS Features |
 |
Plug and Play (PnP) APM 1.2 DMI 2.1 PCI 2.2 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support |
 |
|
 |
 |
 |
Height |
 |
3.5" (89mm) |
 |
Width |
 |
16.8" (426mm) |
 |
Depth |
 |
25.6" (650mm) |
 |
Gross Weight |
 |
49 lbs (22.3kg) |
 |
Available Colors |
 |
Beige, Black |
 |
 |
 |
Buttons |
 |
Power On/Off button
System Reset button
|
 |
LEDs |
 |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
|
 |
 |
 |
Hot-swap |
 |
6x 3.5"SCA Ultra320/160 Hot-swap drives |
 |
Peripheral Bay(s) |
 |
1x 5.25" full-height peripheral bay |
 |
 |
 |
1x 2U SCA Ultra320/160 backplane (without SAF-TE) |
 |
 |
 |
2U 400W AC power supply w/ PFC |
 |
AC Voltage |
 |
100 - 240V, 50/60Hz, 7 Amp |
 |
DC Output |
 |
& 12V + 5V + 3.3V ≤ 385W |
 |
+5V |
 |
33.0 amp |
 |
+5V standby |
 |
2.0 amp |
 |
-5V |
 |
0.8 amp |
 |
+12V |
 |
25.0amp |
 |
-12V |
 |
1.0 amp |
 |
+3.3V |
 |
28.0 amp |
 |
 |
 |
CPU |
 |
Monitors for CPU Cores, +3.3V, +5, ±12V CPU Core auto-switching voltage regulator w/ auto-sense from 1.4V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) |
 |
FAN |
 |
Total of six 3-pin fan headers 4x fans with tachometer monitoring Status monitor with firmware/software on/off control |
 |
Temperature |
 |
Monitoring for CPU, chassis, environment |
 |
LED |
 |
CPU Overheat LED System Overheat LED Suspend-state indicator LED |
 |
Other Features |
 |
Chassis intrusion detection (through LDCM) Chassis intrusion header |
 |
|