SuperServer 8026B-6RF

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Systems   2U   [ 8026B-6RF ]





Integrated Board
Super X8QB6-F

Key Features
1. Quad Intel® Xeon® processor 7500
    series (8-Core) or new gen. Intel®
    Xeon® processors E7-4800 family
    (10-Core), with QPI up to 6.4 GT/s
2. Support 1TB DDR3 ECC Reg. DIMM
3. Auto-switch for: 2 (x16) PCI-E 2.0 or
    1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
    4 (x8) PCI-E 2.0 slots (in low profile)
4. Intel® 82576 Dual-Port Gigabit
    Ethernet Controller
5. 6 Total Hot-swap Drive Bays:
    6x SAS/SATA Drives Support
6. 1400W Gold Level Redundant
    High-efficiency Power Supplies
7. Broadcom 2108 8-Port 6Gbps SAS Controller
    built-in; Hardware RAID 0, 1, 5, 6,
    10, 50 support
8. Integrated IPMI 2.0 with Dedicated LAN

Available Colors: Black    

 Drivers & Utilities   BIOS   IPMI   Tested Memory  Manuals   Drive Options 

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
SYS-8026B-6RF
  • SuperServer 8026B-6RF (Black)
 
Motherboard

Super X8QB6-F
 
Processor/Cache
CPU
  • Quad 1567-pin LGA Sockets
  • Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below:
  • Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 32x 240-pin DIMM sockets
  • Supports up to 1024 GB DDR3 ECC Registered memory at 1066/978/800MHz speed
  • Memory Mirroring supported
Memory Type
  • 1333* / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 32GB**
Memory Voltage
  • 1.5 V, 1.35V**
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 7500 (Boxboro-EX) chipset
  • ICH10R
SAS
    • Broadcom 6Gbps SAS 2108 controller
    • RAID 0, 1, 5, 6, 10, 50 support
    • BBU (battery backup) extension kit (optional)
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond 83527HB chip
 
Input / Output
LAN
  • 3x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers (3 ports)
  • Total 5 USB 2.0 Compliant
VGA
  • 1x VGA Port
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 2U Rackmount
Model
 
Dimensions
Height 3.5" (89mm)
Width 17.2" (437mm)
Depth 27.9" (709mm)
Weight
  • Net Weight: 40 lbs (18.1 kg)
  • Gross Weight: 66.5 lbs (30.2 kg)
Available Colors Black
 
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED
 
Expansion Slots (Low-Profile)
PCI-Express
  • Auto-switch for 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots
 
Drive Bays
Hot-swap
  • 6x 3.5" Hot-swap SAS/SATA Drives Supported
 
Backplane
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
 
Peripheral Drives
DVD-ROM
  • Slim 8x DVD, 24x CD, DVD-ROM (optional)
 
System Cooling
Fans 3x 80mm heavy-duty fans with optimal fan speed control; 1x Air shroud
 
Power Supply
Redundant 1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output
+5V standby
  • 6 Amp
DC Output
+12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified
  Gold Certified
  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN
  • 10x 4-pin fan headers with tachometer status monitoring
  • Low noise fan speed control mode
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 10x fan connectors
Other Features
  • Chassis intrusion detection
 
Operating Environment / Compliance
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X8QB6-F
CSE-828TS-R1400LPBP
1
1
Super X8QB6-F Motherboard
SC828 2U Chassis
Backplane BPN-SAS-828TQ 1 6-port 2U CSE-828 TQ (W/ AMI 9072) backplane, support up to 6x 3.5-inch SAS/SATA HDD
Cable 1 CBL-0097L-02 2 79536-3220,50CM IPASS TO 4 SATA,PB FREE
CD CDR-INTC-Q 1 Driver for Intel quad MBs
Heatsink / Retention SNKP0045P 4 2U Passive CPU Heatsink for X8QBE/6
Optional Parts List
  Part Number Qty Description
Cable CBL-0420L - 27" BBU extension to Broadcom iBBU07
Broadcom Accessory BTR-0018L-0000-LSI
BTR-0018L-kit + CBL-0420L
-
-
LSI00161 IBBU07 BATTERY BACKUP FOR SAS2108
Broadcom iBBU07 extension kit (To Installed at 2.5" HDD Location)
Peripheral Drives DVM-TEAC-DVD-SBT3
DVM-PNSC-DVD-SBT3
-
-
Black slim SATA DVD (8x DVD, 24x CDR), TEAC
BLACK PANASONIC SLIM DVD ROM SATA
Accessories (needed if above slim DVD is used) MCP-220-81502-0N - Slim SATA DVD kit

* Run at speed - 1066MHz
** Please check Tested Memory List for compatibility; 32GB or 1.35V memory requires rev 2.0 or above boards with Millbrook II
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.