| | SYS-8060 | | SYS-8060-B | - SuperServer 8060-B (Black)
| | | CPU | | Four Slot2 Sockets Supports four Intel® Pentium® III Xeon processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz | | System Bus | | 100MHz system bus | | | | Memory Capacity | | Sixteen 168-pin DIMM slots Supports up to 16 GB PC100 memory Super QR16G (Memory Expansion Card) Included | | Memory Type | | PC100 72-bit registered ECC SDRAM, 168-pin gold-plated DIMMs Four-way memory bank interleaving Memory must be populated on four banks at a time | | DIMM Sizes | | 64 MB, 128 MB, 256 MB, 512 MB, 1 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | Serverworks Serverset III HE-SL chipset NB-HE-SL + CSB5 + CIOB2 | | SCSI | | Adaptec AIC-7899W Controller Dual-Channel Ultra160 SCSI | | Network Controllers | | 1x Intel® 82559 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | PCI Expansion | | 2x 64-bit 66/33MHz PCI (3.3V) slots 4x 64-bit 33MHz PCI (3.3V) slots | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 2 USB ports | | Serial Ports | | 2 Fast UART 16550 serial ports | | Parallel Port | | Port header provided; parallel cable required for parallel port | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | BIOS Type | | 4Mb Flash EEPROM with AMI® BIOS | | BIOS Features | | Plug and Play (PnP) APM 1.2 DMI 2.1 PCI 2.2 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support | | | | | | Form Factor | | 4U Rackmountable Tower Optional Rackmount Kit (CSE-PT26) | | Model | | SC860 | | | | Height | | 7.0" (178mm) | | Width | | 17.5" (445mm) | | Depth | | 26.2" (660mm) | | Gross Weight | | 75 lbs (34.1kg) | | Available Colors | | Beige, Black | | | | Buttons | | Power On/Off button System Reset button | | LEDs | | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power Fail LED | | | | Hot-swap | | 4x 3.5"SCA Ultra320/160 Hot-swap Drives | | | | Fans | | 4x 90mm Hot-swappable Fans 1x 90mm Rear Exhaust Fan | | | | 3x 300W AC Hot-swappable power supply modules w/ PFC | | AC Voltage | | 100 - 240V, 47-63Hz, 6A/3.5A | | DC Output | | 12V + 5V + 3.3V ≤ 280W | | +5V | | 30.0 amp | | +5V standby | | 2.0 amp | | -5V | | 0.3 Amp | | +12V | | 18.0amp | | -12V | | 1.0 amp | | +3.3V | | 25.0 amp | | | | CPU | | Monitors for CPU Cores, +2.5V, +3.3V, +5, ±12V CPU Core auto-switching voltage regulator w/ auto-sense from 1.3V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of eight 3-pin fan headers 4x fans with tachometer monitoring Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection (through LDCM) Chassis intrusion header | | |