 |
|
 |
| SYS-5036T-TB |
- SuperServer 5036T-TB (Black)
|
| |
|
| CPU |
- LGA 1366 Socket
- Intel® Core™ i7 990X, i7-980X, i7-975 and i7-965 Extreme Edition
- Intel® Core™ i7 series
- Intel® Xeon® 5600/5500
series
- Intel® Xeon® 3600/3500
series
|
| System Bus |
|
| |
|
| Memory Capacity |
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
| Memory Type |
- 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® X58 Express chipset
- ICH10R + PXH/V
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| Network Controllers |
- Dual Intel® 82574L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- Realtek ALC883 7.1 HD audio
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| PCI-Express |
- 2 (x16) PCI-e 2.0 slots
- 1 (x4) PCI-e slot (using x8 slot)
|
| PCI-X |
- 2x 64-bit 133/100MHz PCI-X (3.3V) slots
|
| PCI |
|
| |
|
| Serial ATA |
- 6 Serial ATA ports
- 6 SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 8x USB rear ports
- 2x USB on-board
- 2x USB Front ports
- Total 12 USB 2.0 Compliant
|
| Audio |
- Realtek ALC883 7.1 HD audio
- 1x S/PDIF digital output
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 2 Fast UART 16550 serial header
|
| |
|
| BIOS Type |
- 4Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports |
- 2x Front side USB ports (USB 2.0 ready)
|
| |
|
|
| Hot-swap |
- 4x 3.5" SATA hot-swap drive bays
|
| Peripheral Bay |
- 2x 5.25" peripheral drive bay
- 1x 3.5" bay for floppy drive
|
| |
|
|
| Floppy |
- Teac Floppy Drive 3.5" 1.44MB (Optional)
|
| |
|
|
| Fans |
- 1x 9.2cm Front Thermal Fan
- 1x 12cm Exaust Fan (Optional)
|
| |
|
|
| 4 x 3.5" SATA Backplane |
| |
|
|
| 465W AC power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 50-60Hz, 6-3 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| Certification |
 80 PLUS Certified
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
