 |
|
 |
| SYS-7033A-T |
- SuperServer 7033A-T (Beige)
|
| SYS-7033A-TB |
- SuperServer 7033A-TB (Black)
|
|
|
| CPU |
|
• Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 512KB L2 (or 1MB L3) integrated Advanced Transfer Cache up to 3.06GHz |
 |
| System Bus |
|
533MHz/400MHz system bus |
|
|
|
| Memory Capacity |
|
• Four 184-pin DIMM sockets
• Supports up to 8 GB DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs |
|
| Memory Type |
|
DDR266/200 Registered ECC or Unbuffered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
|
|
|
| Chipset |
|
• Intel® E7505 chipset
• MCH + ICH4 + P64H2 |
|
| Serial ATA |
|
• Dual Silicon 3112A controllers
• Four Serial ATA ports
• RAID 0, 1 Supported
• RAID 0, 1, 5 Supported WITH ZCR Card (ZCRINT) |
|
| Network Controllers |
|
• Dual Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
|
|
| AGP |
|
8x/4x AGP Pro |
|
| PCI Expansion |
|
• 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot
• 1x 64-bit 100/66MHz PCI-X (3.3V) slots
• 2x 32-bit 33MHz PCI-X (5V) slots
|
|
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
|
| USB |
|
Up to 6 USB 2.0 ports |
|
| Serial Ports |
|
2 Fast UART 16550 serial ports |
|
| Parallel Port |
|
1 ECP/EEP parallel port |
|
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
|
|
| BIOS Type |
|
4Mb Flash EEPROM with Phoenix® BIOS |
|
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• RTC (Real Time Clock) Wakeup
• BIOS rescue hot keys
• Hardware BIOS virus protection |
|
|
|
|
|
| Height |
|
7" (178mm) |
|
| Width |
|
16.8" (427mm) |
|
| Depth |
|
20.9" (531mm) |
|
| Weight |
|
39 lbs (17.7kg) |
|
| Available Colors |
|
Beige, Black |
|
|
|
| Buttons |
|
• Power On/Off button
• System Reset button
|
|
| LEDs |
|
• Power LED
• Hard drive activity LED
• Network activity LED
• System Overheat LED
|
|
| Ports |
|
2x Front side USB ports (2.0 ready) |
|
|
|
| Hot-swap |
|
4x 3.5"SATA hot-swap drive bays |
|
| Peripheral Bay |
|
• 2x 5.25" full-height peripheral bay
• 1x 3.5" full-height peripheral bay |
|
|
|
| Fans |
|
• 1x 12cm exhaust thermal fan
• 1x 9cm mounted thermal cooling fan
• 2x 8cm fans (450W power supply configuration)
|
|
|
|
| 450W Low-noise AC Power Supply (w/ PFC) width Redundant Cooling Feature |
|
| AC Voltage |
|
• 100 - 240V, 50/60Hz, 10 Amp
|
|
| DC Output |
|
• 5V + 3.3V ≤ 160W
• 12V + 5V + 3.3V ≤ 430W
|
|
| +5V |
|
26 amp |
|
| +5V standby |
|
2 amp |
|
| -5V |
|
0.5 amp |
|
| +12V |
|
30amp |
|
| -12V |
|
1 amp |
|
| +3.3V |
|
30 amp |
|
|
|
| CPU |
|
• Monitors for CPU Cores, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
|
| FAN |
|
• Total of six 3-pin fan headers
• 4x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
|
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
|
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
|
| Other Features |
|
• Chassis intrusion detection (through LDCM)
• Chassis intrusion header |
|
|
