 | |
 | | MBD-PDSMU-O | - PDSMU (Standard Retail Pack)
| | MBD-PDSMU-B | | | | |
| | Form Factor | Proprietary | | Dimensions | - 8" x 13 ", (33.02cm x 20.32 cm)
| | | | | CPU | - Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3200 series processor
- Supports a Dual-Core Intel® Xeon® 3000 series processor
- Supports a Quad-Core Intel® Core™2 Extreme series processor
- Supports an Intel® Core™2 Quad series processor
- Supports an Intel® Core™2 Duo series processor
- Supports an Intel® Pentium® processor E2000 series
- Supports a Dual-Core Intel® Pentium® D processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® processor E1000 series
- Supports an Intel® Celeron® processor 400 series
- NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
| | System Bus | - 1066 / 800 / 533 MHz system bus
| | | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
| | Memory Type | - DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| | Memory Voltage | | | | |
| | Chipset | - Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel® 82573V + Intel® 82573L
| | Serial ATA | - Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only) - Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only) | | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO+)
- NOTE: Must use dedicated LAN for IPMI function
| | Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
| | VGA | - On-board ATI ES1000 (16MB) graphics
| | Super I/O | | | Clock Generator | | | | |
| | Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - Up to 6x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal header for 4 USB 2.0/1.1 ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
| | | | |
| | 1U | | | 2U | | | Important Note | - For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability].
| | | |
| | Universal I/O | - 1 Universal (UIO) slot
- Used in conjunction with Supermicro UIO Controller Card
| | PCI-Express | - 2 (x8) PCI-e slot
- 1 (x4) PCI-e slot
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | Voltage | - Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
| | FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
| | LED | - CPU / System Overheat LED
- Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | |
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
