P4SCT+
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ P4SCT+ ]

Enlarge Image   Enlarge Image

Key Features
1. Intel® Pentium® 4 Support up to 3.4 GHz, Celeron® up to 2.8 GHz
2. Intel® E7210 (Canterwood ES) Chipset
3. Up to 4GB DDR 400/333/266 SDRAM
4. 1 x Intel® 82547GI CSA, 1 x Intel® 82541 Gigabit Ethernet Controller
5. Intel® 6300ESB Serial ATA Controller
6. Adaptec® Serial ATA Controller
7. 3 x 64-bit 66MHz PCI-X (3.3V), 2 x 32-bit 33MHz PCI (5V) slots
8. ATI RageXL 8MB PCI Graphic Controller

 
Links & Resources
Recommended Chassis
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKU - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
SKU
  • P4SCT+
 
Physical Stats
Form Factor ATX
Dimensions 12" x 9.5", (30.5cm x 24.1cm)
Processor/Cache
CPU • Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz
• Hyper-threading enabled
System Bus 800 / 533 / 400MHz system bus
System Memory
Memory Capacity • Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs
Memory Type DDR400/333/266 (ECC or non-ECC) unbuffered SDRAM, 184-pin gold-plated DIMMs
DIMM Sizes 128MB, 256 MB, 512 MB, 1 GB
Memory Voltage 2.5 V only
On-Board Devices
Chipset • Intel® E7210 (Canterwood ES) chipset
• MCH + 6300ESB + FWH
Serial ATA • SATA Controller on-chip (Intel® 6300ESB)
  (2x Drive support)
• Adaptec AIC-8110: Marvell® 88SX5041 4-port Hercules-1, rev C0, SATA Controller (4x Drive support)
• Six Serial ATA ports
• RAID 0, 1, 10 Supported (for 4 HDD)
• RAID 0, 1 Supported (for 2 HDD)
SATA Zero-Channel RAID
  • Support for Zero-Channel RAID with Adaptec 2020SAH1 (SATA) ZCR Card: 1A, 3.3V, Low Profile 2.5" x 6.6", 400MHz I/O processor, 64MB ECC DDR memory on board
  • [Card not included]
  • RAID 0, 1, 5, JBOD
Network Controllers • 1x Intel® 82547GI CSA Gigabit Ethernet Controller
• 1x Intel® 82541 Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics ATI Rage XL SVGA PCI video controller with 8MB of video memory
Input / Output
PCI Expansion • 3x 64-bit 66MHz PCI-X (3.3V) slots
• 2x 32-bit 33MHz PCI (5V) slots
IDE • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy 1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
USB • 2x USB 2.0 / 1.1 ports
• 1x USB header supports additional 2x USB 2.0 / 1.1 ports)
Serial Ports 2x Fast UART 16550 serial ports
VGA Port 1x VGA Port
Parallel Port 1x ECP / EEP Parallel Port
LAN Port 2x RJ45 Ports
Keyboard / Mouse PS/2 keyboard and mouse ports
Chassis ( Optimized for P4SCT+ )
1U Chassis SC813MT-300C
SC811T-250
2U Chassis SC822T-550LP
Important Note To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
System BIOS
BIOS Type 4Mb Flash EEPROM with AwardBIOS®
BIOS Features • Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.3
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support
Management
Software SuperDoctor® III
• Watch Dog
Power Configurations • ACPI/APM Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on
PC Health Monitoring
Voltage • Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.85V-1.65V
FAN • Total of five 3-pin fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off control
Temperature • Monitoring for CPU, chassis, environment
• CPU thermal trip support
LED • CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED
Other Features • Chassis intrusion detection
• Chassis intrusion header
 
OS Compatibility

• Please see our OS Compatibility Chart
Standard Retail Package
Part Number Qty Description
P4SCT+ MBD-P4SCT+-O 1 P4SCT+ Motherboard
Manual(s) MNL-071x 1 Manual for P4SCT+
Retention Kits SKT-109 1 Pentium 4, 478 Pin CPU Retention Module
I/O Cables CBL-010
CBL-022
CBL-036
CBL-044
1
1
1
6
9-pin Serial Port Cable
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2 Ft. Amphenol Serial ATA Cable
Driver Disk CDR-INTC 1 Version 1.10 Chipset Driver CD
I/O Shield CSE-PT7 1 I/O Shield For Dual LAN

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.