X7DA3
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X7DA3 ]
X7DA3

Key Features
1. Quad & Dual Core Intel® 64-bit Xeon®
    Support, 667 / 1066 / 1333MHz FSB
2. Intel® 5000X (Greencreek) Chipset
3. Up to 32GB 667/533MHz DDR2 ECC
    FB-DIMM (Fully Buffered DIMM)
4. Intel® 82563EB Dual-port
    Gigabit Ethernet Controller
5. Adaptec AIC-9410W Dual Channel
    SAS Controller, 8-Port
6. 6x SATA (3 Gbps) Ports via ESB2
    Controller
7. 1 (x16) & 1 (x4 in x16) PCI-Express,
    2x 64-bit 133/100MHz PCI-X,
    1x 64-bit 100MHz PCI-X,
    1x 32-bit PCI 33MHz
8. Zero-Channel RAID Support
9. Low Profile IPMI 2.0 (SIMLP) Slot

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
SAS Cable Compatibility
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X7DA3-O
  • X7DA3 (Standard Retail Pack)
MBD-X7DA3-B
  • X7DA3 (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12.075" x 13.05" (30.7cm x 33.2cm)
 
Processor/Cache
CPU
  • Dual 771-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same
    type below:
    • Quad-Core Intel®
      Xeon®Processor
      5400/5300 sequence
      (Harpertown
      /Clovertown processor)

      up to 3.16 GHz
    • Dual-Core Intel®
      Xeon®Processor 5200/5100/5000
      sequence (Wolfdale
      /Woodcrest/Dempsey processor)
      up to 3.40 GHz
System Bus
  • 1333 / 1066 / 667 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
  • Eight 240-pin DIMM sockets
  • Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
  • Dual branch memory bus
  • Memory must be populated in pairs
  • Memory Mirroring supported
Memory Type
  • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 512 MB, 1GB, 2GB, 4GB
Memory Voltage
  • 1.8V only
  • 1.5V(AMB)
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5000X (GreenCreek) chipset
  • MCH + PXH-V + ESB2
SAS
  • Adaptec AIC-9410W Serial-Attached SCSI (SAS) Controller
  • SAS Dual-Channel (internal)
  • Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
  • Host RAID 0, 1, & 10 support
SATA
  • Intel ESB2 SATAII Controller
  • RAID 0, 1, 5, 10 support (Windows Only)
  • RAID 0, 1, 10 support (Linux)
RAID
  • Support for Zero-Channel RAID
  • RAID 0, 1, 5, 10
  • Optional: (Card NOT included)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI slot (SIMLP)
  • (Optional: AOC-SIMLP-B)
  • (Optional: AOC-SIMLP-3) with 3rd LAN support
  • NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
Network Controllers
  • Intel® 82563EB Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT support for fast, scaleable, and reliable networking
Super I/O
  • Winbond 83627HG chip
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
IDE
  • Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • Compact Flash (40-pin connector, IDE 1, single channel) slot
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB
LAN
  • 2x RJ45 LAN ports
USB
  • 4x USB rear ports
  • 2x USB internal header
  • 6 total USB ports, 2.0 Compliant / 1.1 Compliant
Audio
  • AC97 Audio
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
Parallel Port
  • 1 ECP / EEP parallel port
Chassis ( Optimized for X7DA3 )
2U Chassis
3U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To ensure system stability, a 500W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-Express
  • 1 (x16) PCI-e slot
  • 1 (x4) PCI-e (using x16) slot
PCI-X
  • 2x 64-bit 133/100MHz PCI-X (3.3V) slots
  • 1x 64-bit 100MHz PCI-X (3.3V) slot
PCI
  • 1x 32-bit 33MHz PCI (5V) slot
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0
  • PCI-X 1.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) v2.0
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechansim
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • CPU Fan Auto-off in Sleep Mode
  • Power-on mode for AC power recovery
  • Internal/External modem remote ring-on
  • Suspend to RAM (STR)
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, -12V & +5V Standby, VBAT
  • CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of eight 4-pin fans
  • 8x fans with status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support for 3-pins (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis, environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend-state Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
OS Compatibility

• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Class B
Parts List
  Part Number Qty Description
X7DA3 MBD-X7DA3-O 1 X7DA3 Motherboard
Manual(s) MNL-0893 1 Motherboard Manual for X7DA3
I/O Cables CBL-0022L
CBL-0036L-03

CBL-0044L
CBL-0097L-02
1
1
4
2
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
SAS Cable
Driver Disk CDR-X7 1.10 1 Version 1.10 CD or later
I/O Shield CSE-PT53L REV.B 1 Motherboard I/O Shield

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.