 | |
 | | SYS-6013P-8+ | - SuperServer 6013P-8+ (Beige)
| | SYS-6013P-8+B | - SuperServer 6013P-8+B (Black)
| | | | CPU | | • Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 1MB integrated Advanced Transfer Cache up to 3.20GHz |  | | System Bus | | 533MHz/400MHz system bus | | | | | Memory Capacity | | • Six 184-pin DIMM sockets
• Supports up to 12 GB DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs | | | Memory Type | | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | | DIMM Sizes | | 256 MB, 512 MB, 1 GB, 2 GB | | | Memory Voltage | | 2.5 V only | | | | | Chipset | | • Intel® E7501 chipset
• MCH + ICH3-S + P64H2 | | | SCSI | | • Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI | | | RAID | | Support for Zero-Channel RAID w/ Supermicro Socket DIMM All-In-One ZCR Card AOC-SOZCR1
(Card not included) | | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (Optional) | | | Network Controllers | | • Dual Port Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | • 1x full-height, full-length 64-bit 133/100MHz PCI-X (3.3V) expansion slot (Riser card required) w/ VXB (Virtual Extended Bus) slot
• 1x low-profile slim 64-bit 100MHz PCI-X (3.3V) expansion slot (Riser card required) | | | | | IDE | | • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | | USB | | 1 USB port | | | Serial Ports | | 1 Fast UART 16550 serial ports | | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | BIOS Type | | 4Mb Flash EEPROM with Phoenix® BIOS | | | BIOS Features | | • Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Hardware BIOS virus protection | | | | | | | Height | | 1.7" (43mm) | | | Width | | 17.2" (437mm) | | | Depth | | 25.6" (650mm) | | | Gross Weight | | 42 lbs (19.0 kg) | | | Available Colors | | Beige, Black | | | | | Buttons | | • Power On/Off button
• System Reset button | | | LEDs | | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED | | | Ports | | none | | | | | Hotswap | | 4 x 3.5" hot-swap Ultra320/160 SCSI Drive Bays w/ SAF-TE | | | | | Floppy | | TEAC 3.5" 1.44MB Slim Floppy Drive | | | CD-ROM | | TEAC Slim 24x CD-ROM drive | | | | | 1x SCA813S 1U SCSI Backplane w/ SAF-TE | | | | Cold-swappable 500W AC power supply module w/ PFC
[ 20-pin, (8-pin=12V) ] | | | AC Voltage | | • 100 - 240V, 60-50Hz, 10 Amp | | | DC Output | | • 5V + 3.3V ≤ 160W | | | +5V | | 30.0 amp | | | +5V standby | | 2.0 amp | | | +12V | | 39.0amp | | | -12V | | 1.0 amp | | | +3.3V | | 21.0 amp | | | | | CPU | | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, 3.3V Standby
• CPU Core 4-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) | | | FAN | | • Total of three 3-pin fan headers
• 3x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control | | | Temperature | | • Monitoring for CPU, chassis, environment
• CPU thermal trip support | | | LED | | • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED | | | Other Features | | • Chassis intrusion detection
• Chassis intrusion header
• Chipkill support
• SuperDoctor® III
• Watch Dog | | |
