A+ Server 1042G-TF
  A+ Products  Systems   1U   [ 1042G-TF ]








Integrated Board
H8QGi+-F


Key Features

1. Four AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. Up to 1TB DDR3 Registered ECC

    1600/1333/1066 SDRAM in 32 DIMMs
3. 1x PCI-e Gen 2.0 x16 slot

    (Low profile add-on card)
4. Dual-port GbE LAN Controller, 4x

    USB 2.0 ports, 1x dedicated LAN for

    system management (IPMI 2.0)
5. 3x Hot-swap SAS/SATA Drive Bays
6. 1400W High-efficiency Power Supply

    Gold Certified


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-1042G-TF
  • A+ Server 1042G-TF (Black)
 
Motherboard
Super H8QGi+-F
 
Processor/Chipset
CPU
  • Quad 1944-pin Socket G34
  • Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD SR5690/SP5100 Chipset
Note
  • Supports 6000 processors with Max ACP 80W (TDP 115W)
 
System Memory
Memory Capacity
  • 32 DIMM sockets
  • Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
  • Quad channel memory bus
  • For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port

      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2 graphics
Super I/O
  • Winbond® W83527 chip
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 4x internal header, and 1x type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 
Expansion Slots
PCI-Express
  • 1x PCI-e 2.0 x16
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 27.75" (705mm)
Gross Weight
  • 43 lbs (19.5 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
 
Drive Bays
Hot-swap
  • 3x 3.5" hot-swap SATA drive bays
  • Enterprise SATA HDD only recommended
 
Peripheral Drives
DVD-ROM
  • Slim DVD-ROM drive (optional)
 
Backplane
SAS HDD Backplane with SES2
System Cooling
Fans
  • 6x heavy-duty counter-rotating PWM fans with optimal fan speed control
 
Power Supply
1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output

+5V standby
  • 4 Amp
DC Output

+12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp
Certification Gold Certified

  Gold Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 9-fan status tachometer monitoring
  • Up to nine 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control

     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 9x fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8QGi+-F 1 Super H8QGi+-F Motherboard
Chassis CSE-818TQ-1400LPB 1 1U Chassis
Adapter 1 CDM-USATA-G 1 mini-SATA to USB adapter for slim DVD
Air Shroud MCP-310-81807-0B 1 Mylar air shroud for SC818TQ (H8QG6+)
Cable 1 CBL-0481L 1 SATA,INT,ROUND,ST-ST,81CM,30AWG
Cable 2 CBL-0484L 2 SATA,INT,ROUND,ST-ST,55CM,30AWG
Cable 3 CBL-0157L 1 CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,40CM,28AWG
Cable 4 CBL-0341L 1 USB 2.0,INT,LCD,DVD,1X4/P2.54 TO 2X5/P2.54,70CM,28/24AWG
Heatsink / Retention SNK-P0042P 4 1U Passive CPU HS for AMD Socket G34
Riser Card RSC-RR1U-E16 1 RSC-RR1U-E16 with PIC-E x16 output


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00043-0N - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Peripheral Drive DVM-TEAC-DVD-SBT4 - BLACK TEAC SLIM DVD ROM SATA DRIVE

ROHS,HF,RoHS/REACH,PBF
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region